High-pressure putty and paint sprayers DERUTU
D836
D836 high-pressure putty and paint sprayer
Sprays putty and paint at 11–22 MPa, 120 m head, for large volumes
- Pressure
- 11–22 MPa
- Output (manufacturer data)
- over 2,500 m²/day
- Head
- 120 m
Solution 4
Putty and paint spraying
High-pressure putty spraying over large areas, machine leveling, machine sanding. Over 1,500 m² per day according to the manufacturer.
Putty is machine-mixed, sprayed over large areas with a D836 or D976 high-pressure sprayer, leveled with a DM machine and finished with a sander. According to the manufacturer, a crew of 4 covers over 1,500 m² per day.
- Crew (manufacturer data)
- 4 people; the manufacturer reports output equal to more than 15 people
- Output (manufacturer data)
- over 1,500 m²/day (manufacturer data)
Equipment in this solution
-
Spray putty or paint
-
Automatic levelling
-
Sanding and finishing
High-pressure putty and paint sprayers DERUTU
D976
D976 high-pressure putty and paint sprayer
Compact 80 kg option, runs on 220 V, 380 V or fuel
- Pressure
- 11–22 MPa
- Output (manufacturer data)
- over 1,500 m²/day
- Power
- 220 V, 380 V or fuel
Automatic plastering machines DERUTU
DM Leading PRO
DM Leading PRO 4.2 m automatic plastering machine
Levels the putty coat on large walls
- Working height
- 0–420 cm
- Output (manufacturer data)
- over 800 m²/day
- Power
- 2 × 48 V batteries or mains
First, a mixer automatically blends the putty to a uniform consistency. Next, a D836 or D976 high-pressure sprayer applies it over large areas with strong, even spray force.
Then the DM machine levels the surface, and a sander finishes it. The result is flat and smooth, free of voids, with little need for touch-up.
The same high-pressure sprayer can apply primer, emulsion paint and water-based waterproofing, so a putty and paint crew can use one machine for several work items.
Advantages over manual work
- Output per person triples: 4 people match more than 15 (manufacturer data)
- Strong, even spray force for a flat, smooth, void-free finish with little touch-up
- Lower crew management cost, a simpler process with fewer steps
- One sprayer for putty, primer, emulsion paint and water-based waterproofing
As published by the manufacturer DERUTU. Actual output depends on site layout, materials and crew skill.
Work process
Mix putty by machine
Prepare the substrate and fill joints
Spray putty by machine
Level by machine
Sand by machine
Best when
Best when
- Putty and paint contractors with large, steady volumes in apartments, offices, factories
- Crews that want to try mechanization with low upfront capital (start with the D976)
Think twice when
- Whether your putty is suitable for machine spraying: run a trial to adjust viscosity and tip size
- The D836 needs 380 V or the fuel-powered version
The manufacturer estimates payback after about 10,000 m², based on labor rates in China. Use the payback calculator with your Vietnamese rates.
Open the payback calculator1-year warranty · On-site support · Video guidance (manufacturer policy)
Watch it run
Machine spraying, then DM leveling: before and after
The full outdoor process: a sprayer applies mortar, a DM machine levels it on its rail, and the surface is compared before and after.
Original DERUTU footage, job site in China.
DM Leading PRO plastering on site
The DM Leading PRO leveling a wall on a real job site.
Original DERUTU footage, job site in China.
Frequently asked questions
The manufacturer reports about 95% material utilization. Actual consumption depends on coat thickness and the sprayer's skill; we show you how to set pressure and tip size for thin, even coats.
The D976 weighs 80 kg and runs on 220 V, 380 V or fuel, good for small crews moving between floors. The D836 delivers 17 L/min with a 120 m head, suited to large volumes and high-rise buildings (manufacturer data).
Quote the putty spraying set
Only 3 required fields. Add details for a more precise proposal.
We have received your request
Thank you.